|
|
 |
 |
|
REMOVABLE TOP COVER TO ACCESS THE FILTER
TOP COVER TO KEEP COOL AIR IN
FOUR SIDE HOLES TO PULL COOL AIR IN
|
MINI COOPER F55/F56/F57 PARTS |
|
2014 F56 S SHOWN
DUAL 4 INCH SLASH CUT TIPS
VCP PRECISE TIG WELDS
FRONT
MID
REAR
PLEASE ONLY COMPARE VCP EXHAUST SYSTEMS TO AKRAPOVIC'S QUALITY.
|
Scottsdale, Arizona F56 Mini Cooper S Hardtop 2.0L Exhaust system for 2014 + Models (DP series) VCP is the first to bring out a full 3.0 " exhaust system. This is our Mandrel bent performance exhaust for the F56 Hardtop S 2.0. Made from 3.0" 304 stainless steel exhaust tube. The exhaust note is a deep tone in sport mode. Comes with dual 4 inch slash cut exhaust tips. This is one of the finest exhaust systems that you can purchase. Don't settle for half an exhaust system for your F56 Hardtop S 2.0. Go with our full flex joint back system. 100% 304 stainless steel. Simple installation. Our system is around 9 foot long and is shipped to you in two sections. Our system is from the turbo's down pipe back, removing the second cat. The system does not remove or effect the oxygen sensors in anyway, just offers you the most performance out of your F56 Hardtop S 2.0. (No cutting required). The video car is running the stock downpipe and VPN 907 DPF exhaust system. VPN 907 DPS 3.0" Tube $999.00 VPN 907 DPF 3.0" Tube $1099.00 100% 304 STAINLESS STEEL Free shipping DOES NOT FIT EURO MODELS(DP) For off road use only or competition. Not emissions, DOT, CARB, or EPA certified. Not intended or applicable for use on public streets or highways LASER CUT REAR HANGER BRACKET
VCP 3.0 INCH 304 SS PIPE ON LEFT OEM 2.35 INCH 409 SS PIPE ON RIGHT
VCP PRECISE TIG WELDS CNC MACHINED V-BAND FLANGES
5 INCH RESONATOR FRONT SECTION
LASER CUT REAR HANGER BRACKET
|
|
2015 F56 NON S SHOWN
4 INCH POLISHED TIP
VPN 909 SCMD SYSTEM SHOWN
VPN 909 SC SYSTEM SHOWN
VPN 909 DP FULL SYSTEM SHOWN
SC/DP REAR MUFFLER SHOWN
MANDREL BENT 304 SS EXHAUST TUBE
304 SS V-BAND CLAMP SHOWN
|
Scottsdale, Arizona F56 Mini Cooper NON S Hardtop 1.5L Exhaust system for 2014 + Models This is our Mandrel bent performance exhaust for the F56 Hardtop NON S 1.5L made from 2.5 inch 304 stainless steel exhaust tube. We exit the vehicle with one 4 inch round tip. It is available in polished 304 SS or black powder coated 304 SS. The exhaust note is a deep tone in sport mode. This is one of the finest exhaust systems that you can purchase. 100% 304 stainless steel. Simple installation. You can choose between three systems: 1. The SCMD / SC system is a slip on system that clamps to your stock front section, just behind the front resonator. 2. The DP system is a bolt on system that removes the second cat and bolts to the factory down pipes V-band clamp. The DP system does not remove or effect the oxygen sensors in anyway, it offers you the most performance out of your F56 Hardtop NON S 1.5L. (No cutting required on DP series) VPN 909 STARTS @ $649.00 Free shipping 2014+F56 NON S CARS ONLY(DP) For off road use only or competition. Not emissions, DOT, CARB, or EPA certified. Not intended or applicable for use on public streets or highways
FACTORY RESTRICTIVE EXHAUST SHOWN
HOT SPOTS THAT ROB HORSEPOWER
FACTORY RESTRICTIVE EXHAUST SHOWN
VCP PRECISE TIG WELDS
4 INCH BLACK TIP SHOWN |
|
BLACK TIP VERSION SHOWN
LASER CUT 304 SS HANGER BRACKET |
Scottsdale, Arizona F55/F56/F57 Mini Cooper S 2.0L Black Series Exhaust system for 2014 + Models (AB series) This is our Mandrel bent 2.5 inch AB exhaust system for the F55/F56/F57 S models. We use 2.5 inch 304 stainless steel tube on our AB series exhaust system. The exhaust note is a deep tone in sport mode, and comes with dual 4 inch straight cut exhaust tips in black powder coat. This is one of the finest exhaust systems that you can purchase. 100% stainless steel. Simple installation. You must cut your stock exhaust. VPN 908R $699.00 F56S/F57S 2 DOOR ONLY VPN 910R $749.00 F55S 4 DOOR ONLY 100% STAINLESS STEEL Free shipping
4 INCH BLACK TIPS SHOWN
MOUNTING HARDWARE SHOWN |
|
LEFT AND RIGHT BRACKETS
CROSS BAR |
Scottsdale, Arizona F55/F56/F57 Mini Cooper Dual Driving Light Brackets for 2014 + Models VCP dual driving light brackets for the F56 Mini Cooper/Cooper S. Laser cut from 304 Stainless steel, then Tig welded to perfection. They mount to the bumper support using the factory bolts. Finished in Texture black powder coat. Comes complete with all SS hardware and instructions. VPN 425 $299.00 Free shipping
|
LEFT AND RIGHT BRACKETS
CENTER BRACKET CROSS BAR RADIUS QUAD BAR |
Scottsdale, Arizona F55/F56/F57 Mini Cooper Quad Driving Light Brackets for 2014 + Models VCP quad light brackets for the F56 Mini Cooper/Cooper S. This is a five piece Quad light bar kit. Laser cut from 304 stainless steel. Includes left and right brackets, two center brackets and one radius bar to match the curve of the grill perfectly. The brackets mount to the bumper support using the factory bolts. Finished in Texture black powder coat. Comes complete with all SS hardware and instructions. VPN 425-4 $399.00 Free shipping |
6.3 Inch Hella 500 (clear glass shown)
6.3 Inch Hella 500 (Black magic shown)
SIDE VIEW (Hella 500)
|
Scottsdale, Arizona F55/F56/F57 Mini Cooper Dual Driving Light Kit for 2014 + Models Improve the look of your F56 Mini with these driving lights. This is a complete Dual driving light kit for the F56 Mini. The kit includes two rally lights in your choice. All have 55 watt H3 bulbs. The kit includes heavy duty brackets, relay, all wiring, One interior switch, hardware, and installation instructions. Everything you need to light up the road. VPN 718 START @ $359.00 Free shipping
3.5 Inch LED Light Kit Shown |
6.3 Inch Hella 500 (Black magic shown)
5.5 Inch Light Kit Shown
|
Scottsdale, Arizona F55/F56/F57 Mini Cooper Quad Driving Light Kit for 2014 + Models Improve the look of your Mini with these driving lights. This is a complete Quad driving light kit for the F56 Mini. The kit includes four rally lights in your choice. All have 55 watt H3 bulbs. The kit includes heavy duty brackets, relay, all wiring, One interior switch, hardware, and installation instructions. Everything you need to light up the road. VPN 718-4 START @ $519.00 Free shipping
3.5 Inch LED Light Kit Shown
|
|
Scottsdale, Arizona F55/F56/F57 Mini Cooper and Cooper S Jack pads for 2014 + Models We cnc machine these floor jack pads from 6061-T6 aircraft aluminum. The only way to lift your Mini without damage. VPN 1205 $29.95 Free shipping
|
Factory Rear Sway Bar Shown
Welded D-Bushing Stop Washer's
2-position rear sway bar
VCP Rear Sway Bar Shown
|
Scottsdale, Arizona F55/F56/F57 Mini Cooper and Cooper S rear sway bar VCP 23MM rear sway bar will increase handling and cornering grip over the O.E.M. 20MM hollow rear sway bar. We manufacture all our sway bars from solid 4140 Chromoly, shot peeded and heat treated, with forged ends. We only use the best material. Our 2-position rear sway bar is adjustable for those track days. One prime coat and then one finish coat in Bright Red for a long lasting finish. This kit comes complete with new greaseable sway bar D bushings and installation instructions. 10 lbs 5oz / VCP 23MM SOLID BAR WITH D-BUSHINGS VPN 1800 $349.00 Free shipping
1. Forged ends. 2. Solid 4140 Chromoly. 3. Greaseable D bushings. 4. Shot Peened 5. Heat treated |
1.25 INCH 7075-T6 ALUMINUM
303 STAINLESS STEEL MISALIGNMENT SPACERS
|
Scottsdale, Arizona F55/F56/F57 7075-T6 Aluminum Rear Control Arm's VCP 7075-T6 aluminum rear lower control arm's. We cnc machine the center bars from 1.25 inch 7075-T6 aluminum. We use heavy duty rod ends with a self lubricating carbon fiber-reinforced inserts. The threaded rod ends allow you to dial the suspension camber to your desired spec. We cnc machine the misalignment spacers from 303 stainless steel. VCP only uses the best material available to manufacture all our parts. The kit comes with left and right lower control arm's with all hardware and installation instructions. The VCP rear control arm's are pre-set to the approximate stock lengths. Finished in Texture black powder coat. 3 lbs 9 oz EACH ARM COMPLETE VPN 2004 $359.00 ON SALE $299.00 Free shipping ADJUSTABILITY The best method for measuring camber is by using a proper camber gauge. Remember to use the stock camber as a baseline even though stock camber on a lowered Mini will already have some negative camber. It is simply a starting point.
|
6061-T6 ALUMINUM CENTER BAR
STAINLESS STEEL END PLATES
|
Scottsdale, Arizona F55/F56/F57 Tower Plates with Strut Bar for 2014+ Mini Cooper VCP has come out with a strut bar and tower plate combo for the F55/56/57 Mini Cooper's. This will help stiffen up the front end. Strut bars are known to improve handling. The tower plates are laser cut from 304 stainless steel and tig welded to perfection. The center bar is CNC machined from 6061-T6 aluminum. All parts are finished in texture black powder coat. DOES NOT FIT CARS WITH DYNAMIC DAMPER CONTROL VPN 1114 $249.00 Free shipping |
VPN 711 WITH YAKIMA RAPTOR
INSTALLED SS ROD
VPN 711 BUMPER BRACKET SHOWN
|
Scottsdale, Arizona F55/F56/F57 Bike rack bracket and Stainless Steel rods for 2014 + VCP rear bike rod bracket and two stainless steel rods to work with a yakima bike tray. We have come out with a threaded bracket to bolt to the rear aluminum bumper support. Mini's rear bumper only has threads on one side for the tow hook, but two plastic access covers. This kit comes complete with one threaded bracket and two stainless steel rods. The kit comes with complete instructions and all hardware needed. Not recommended with Mini rear PDC. Bicycle tray's we recommend: (not included) 1. Yakima Raptor Aero #02093. 2. 1 UP Quik Rack. DOES NOT FIT JCW EXTERIOR PACKAGE VPN 711 $249.00 F56 (3 door) VPN 712 $249.00 F55 (5 door) Free shipping 
PARTS INCLUDED IN THE PREP KIT |
VPN 711 EURO WITH YAKIMA RAPTOR
INSTALLED SS ROD |
Scottsdale, Arizona F55/F56/F57 Bike Rack Stainless Steel rods for 2014 + VCP rear bike rack rods for Mini bike prep equipped car's only. The kit includes two stainless steel rods to work with many bike tray's on the market. The stainless steel rod's thread in to the rear aluminum bumper support. The kit comes with complete instructions. Not recommended with Mini rear PDC. Bicycle tray's we recommend: (not included) 1. Yakima Raptor Aero #02093. 2. 1 UP Quik Rack. DOES NOT FIT JCW EXTERIOR PACKAGE VPN 711 Euro $189.00 Free shipping |
|
Scottsdale, Arizona F55/F56/F57 Downpipe VIP's catless downpipe made from mandrel bent 3.0 inch and 2.5 inch 304 stainless steel. Machined 304 ss .750 (3/4) inch thick turbo V-band flange. Precise tig welding and Factory fitment. Expect only the best from VCP exhaust parts. You will need to have an ECU tune after installation. Does not require any factory heat shields to be trimmed. VPN 403-1.5L $349.00 VPN 404-2.0L $349.00 Free shipping PLEASE SELECT YOUR ENGINE SIZE AT CHECKOUT.
VCP on left @ 5.8 LBS Factory on right @ 9.1 LBS
(DP) For off road use only or competition. Not emissions, DOT, CARB, or EPA certified. Not intended or applicable for use on public streets or highways |
|
Scottsdale, Arizona F55/F56 Mini Cooper rear wiper delete for 2014 + Models This part eliminates the rear wiper, leaving the car with a cleaner look. All metal powder coated center cap. Retains stock rear wiper seal. (NO LEAKS) Don't settle for copies. Comes with installation instructions. VPN 632 $30.00 Free shipping |
|
|
