Silver flat bar/ Black plates

Black round bar/ Black plates

Suspension Parts

R55S / R56S/ R57S Mini Cooper, Cabrio and Clubman Strut Tower Bar for 2007+ Models

Scottsdale, Arizona

This is VPN 1107 strut bar. The bar helps stiffen up the front end for handling purposes. The flat bar is finished in silver nickel plated or texture black. The round bar is finised in texture black. The left and right mounting plates are finished in texture black. Our strut bar is centered on the strut towers for maximum strength. Does not clear factory airboxes. Works well with VPN 801/803.

Call or email first with any fitment questions.

VPN 1107: $199.00

ON SALE: $149.00

FREE SHIPPING

VERSIONS

At Vip we try to achieve the best fit and finish possible with all our products as shown below with our strut bar plates. Don"t settle for seconds.

 

 

 

R55/R56/R57 Strut Tower Protector Plates for 2007/2010 Hardtop, Cabrio and Clubman

Scottsdale, Arizona

The strut towers have been known to mushroom on the older Mini's. But only time will tell if the new Mini's will have the same issue. Therefore, why not protect them now. These will help strengthen the sheet metal towers. They are made from 6061 aircraft aluminum, CNC milled to perfection, 5/8" thick with our custom made nut bolts and laser cut washers so that you can bolt down the full 5/8" thick plate. These are one of a kind. Finish is black powder coated. The fit is like no other.

The strut bar clears the stock S intake cover on 2007/2010 S cars. The strut bar Does not clear the JCW lid on 2007/2010 S cars. 2011+ S cars must use VPN 803 for the cross bar to fit. Contact us with questions about fitment.

VPN 1029: plates $159.00 (NON S CARS)

VPN 1030: plates $159.00 (S CARS ONLY)

VPN 1031: Strut bar $149.00 ( S CARS ONLY)

VPN 1032 Strut Bar/ Tower Plates: $279.00 ( S CARS ONLY)

FREE SHIPPING

VERSIONS
Cars
 

Let's Talk Quality

VCP 5/8 inch thick tower plates on the left, and the competitors recessed 1/4 inch thick plate with factory nut on right. What would you like protecting your strut towers?

 

R50/R52/R53 Strut Tower Protector Plates for 2002 - 2006 Hardtop and 2004 - 2008 Cabrio

Scottsdale, Arizona

The strut towers can mushroom after heavy impacts from the shocks or low profile tires. These help strengthen the sheet metal towers. They are made from 6061 aircraft aluminum, CNC milled to perfection, 5/8" thick with our custom made nut bolts and laser cut washers ,so that you can bolt down the full 5/8" thick plate. These are one of a kind. Finished in black powder coat. The fit is like no other.

R50/R52/R53 VPN 1025: $149.00

R52S/ R53S VPN 1026 : Strut bar $149.00

R52S/ R53S VPN 1027 Strut Bar/ Tower Plates: $279.00 (Fits JCW car)

FREE SHIPPING

VERSIONS
Cars
 

 

 

 

 

R50/R52/R53/R55/R56/R57

Jack pads

Scottsdale, Arizona

We cnc machine these floor jack pads from 6061-T6 aircraft aluminum. The only way to lift your Mini without damage.

VPN 1200 Jack pads

FREE SHIPPING

VERSIONS

Solid 4140 Chromoly

Forged ends

Greaseable D bushings

R50/R52/R53/R55/R56/R57 Mini Cooper rear sway bar for 2002 + models

Scottsdale, Arizona

VCP 23MM rear sway bar will increase handling and cornering grip over the O.E.M. 16MM rear sway bar. Our 3-position rear sway bar is adjustable for those track days. We manufacture all our sway bars from high strength solid 4140 Chromoly. We only use the best material. One prime coat and then one finish coat in Bright red for a long lasting finish. This kit comes complete with new D bushings and full instructions.

10.6 lbs (Sway bar)

.7 lbs (D- bushings)

VPN 1710: $249.00

ON SALE $199.00

FREE SHIPPING

Cars

Welded D-bushing stops

7075-T6 ALUMINUM BODY

303 STAINLESS STEEL MISALIGNMENT SPACERS

R50/R52/R53/R55/R56/R57 Mini Cooper rear Lower Control Arm for 2002 + models

Scottsdale, Arizona

VCP 7075-T6 aluminum rear lower control arms. We cnc machine the center bars from 1.25 inch 7075-T6 aluminum. We use heavy duty rod ends with self-lubricating carbon fiber-reinforced inserts. The threaded rod ends allow you to dial the suspension camber to your desired spec. We cnc machine the misalignment spacers from stainless steel. VCP only uses the best material available to manufacture all our parts. The kit comes with left and right lower control arms with all hardware and installation instructions. The VCP rear control arms are pre-set to the approximate stock lengths. Finished in Texture black powder coat.

3.9 LBS EACH ARM COMPLETE

VPN 2000: $349.00

ON SALE $249.00

FREE SHIPPING

 

ADJUSTABILITY

The best method for measuring camber is by using a proper camber gauge. Remember to use the stock camber as a baseline even though stock camber on a lowered Mini will already have some negative camber. It is simply a starting point.