Scottsdale, Arizona

JCW Parts

R60/R61 Mini Cooper JCW Countryman/Paceman 2013 + Models

We made some changes to our very popular AIRVIP 3 (VPN 803) to fit the JCW Countryman/Paceman. This required the mounting brackets to be changed because of the new JCW intake manifold for 2013. The kit comes with a K&N high flow air filter. Brackets, silicone tubes, clamps and all hardware needed to let your JCW breathe right. Laser cut and powder coated mounting bracket with removable top cover to access the filter for cleaning. Watch our video on AIRVIP 3 and note how solid the mounting is with the added top cover and mounting bracket. The top cover keeps the cool air (which comes from the O.E.M. fresh air tube) trapped. Thus reducing intake temperatures. All our parts are made from the highest quality materials. The top cover is powder coated in texture black.

VPN 803-13 (2013+): $269.00

FREE SHIPPING

Cars
 

 

Call or email for EURO Mini's

 

R60/R61 Mini Cooper JCW Countryman/ Paceman Exhaust for 2013 + Models

(DP series) This is our Mandrel bent performance exhaust for the JCW Countryman/Paceman. Made from 2.5 inch 304 stainless steel exhaust tube. This works with your JCW tips and rear valance. The exhaust note is a deep tone. This is one of the finest exhaust systems that you can purchase. Don't settle for half an exhaust system for your JCW Car, Go with our full flex joint back system. 100% stainless steel. Simple installation. Our system is around 11 foot long and is shipped to you in three sections. Our system is from the turbo's down pipe back, removing the second cat. The system does not remove or effect the oxygen sensors in anyway, just offers you the most performance out of your JCW Car. Requires cutting the O.E.M. exhaust system after the front flex joint (slip-on)

VPN 407 DP-JCW JCW Exhaust System: $1249.00

FREE SHIPPING

CARS

The front resonator is 4 x 14in. and the rear muffler is 20 x 8 x 5in.

(DP series) For off road use only or competition. Not emissions, DOT, CARB, or EPA certified. Not intended or applicable for use on public streets or highways.

 

R60/R61 Mini Cooper JCW Countryman/Paceman Catless Downpipe for 2013 + Models

VIP's catless downpipe made from mandrel bent 2.5 inch 304 stainless steel. Laser cut 304 ss 3/8 inch thick turbo flange. Laser cut mounting bracket with VIP logo. Plus, precise tig welding and Factory fitment. Expect only the best from VCP exhaust parts. You will need to have an ECU tune after installation.

VPN 402 DP $349.00

FREE SHIPPING

CARS

INCLUDED IN KIT

304 SS VCP Down Pipe

RTV Silicone Gasket

3/8 Offset Oxygen Sensor Wrench

3/8 Bolt For V-Band Removal

Anti-Seize Copper Grease

 

 

(DP) For off road use only or competition. Not emissions, DOT, CARB, or EPA certified. Not intended or applicable for use on public streets or highways

 

R60/R61 Mini Cooper JCW Countryman/Paceman Strut bar for 2013 + Models

We have come out with this strut bar and tower plate combo for the R60/R61 JCW Countryman/Paceman. The bar clears your stock JCW intake. The end plates are laser cut from steel then tig welded to perfection. The end plates are powder coated in Texture black and the round bar comes in Texture black.

VPN 1113 Strut Bar/ Mounting Plates: $199.00

FREE SHIPPING

Cars
 

Solid 4140 Chromoly

Greaseable D bushings

Forged ends

R60/R61 Mini Cooper JCW Countryman/Paceman Rear sway bar for 2013 + Models

VCP 23 MM JCW Countryman/Paceman rear sway bar will increase handling and cornering grip over the O.E.M. 17MM rear sway bar. Our 3-position rear sway bar is adjustable for those track days. We manufacture all our sway bars from high strength solid 4140 Chromoly. We only use the best material. One prime coat and then one finish coat in Bright Red for a long lasting finish. This kit comes complete with new greaseable sway bar D bushings and full instructions.

VPN 1740 R: $349.00

FREE SHIPPING

SOLD OUT

VCP 3-position adjustable rear sway bar

Aluminum spacers and grease included

 

 

R60/R61 Mini Cooper JCW Countryman/Paceman Turbo Heat Shield for 2013 + Models

This will cover the O.E.M. turbo heat shield to dress up the hammer job of the factory part and also keep the heat under control from the turbo. Laser cut from 300 series stainless steel and then run through the grainer to add a nice finished look. Comes with CNC machined mounting hardware and all stainless steel bolts. Instructions included. You will have to remove the plastic wire dressing cover on some cars to install or trim the front lip on the plastic cover.(shown in picture)

VPN 1302: $109.00

FREE SHIPPING

Cars
 

R60/R61 Mini Cooper JCW Countryman/Paceman Rally/Driving Light Brackets for 2013 + Models

We have come out with our driving light brackets (for 2 lights) for the Mini JCW Countryman. Laser cut from 304 stainless steel. Precise tig welding and powder coated texture black. There is NO DRILLING involved. They mount to the bumper support using the factory bolts. Grill must be trimmed (passenger side only) Comes with all hardware, complete instructions and grill template.

VPN 515: $169.00

FREE SHIPPING

CARS
 

 

Center bracket shown

R60/R61 Mini Cooper JCW Countryman/Paceman Quad Rally/Driving Light Brackets for 2013 + Models

We have come out with this quad light bar for the JCW Countryman/Paceman. Laser cut from 304 stainless steel. Precise tig welding and powder coated texture black. This is a five piece Quad light bar kit. Includes left and right brackets, two center brackets and one radius bar to match the curve of the grill perfectly. The brackets mount to the bumper support using the factory bolts. There is NO DRILLING or removal of any bumper parts required to install. Grill must be trimmed (passenger side only) Comes with complete hardware, instructions and grill template.

VPN 515-4: $289.00

FREE SHIPPING

Cars
 

VCP guide to choosing your lights

R60/R61 Mini Cooper JCW Countryman/Paceman Dual Rally Driving Light Kit for 2013+ Models

Improve the look of your Mini Cooper JCW Countryman/Paceman with VIP's driving light kit. This is a complete driving light kit for the R60 Mini Countryman JCW. The kit includes two 55 watt lights, 2 heavy duty brackets, relay, all wiring, one interior switch, hardware, and installation instructions. Everything you need to light up the road. Grill must be trimmed on one side.

VPN 618 $399.00

FREE SHIPPING

VERSIONS

 

VCP guide to choosing your lights

R60/R61 Mini Cooper JCW Countryman/Paceman Quad Rally Driving Light Kit for 2013+ Models

Improve the look of your Mini Cooper JCW Countryman/Paceman with VIP's driving light kit. The kit includes four 55 watt lights, left and right brackets, 2 center brackets and one radius bar to match the bumper contour perfectly. Relay, all wiring, one interior switch, hardware, and installation instructions included. Everything you need to light up the road. Grill must be trimmed on one side.

VPN 618-4 $599.00

FREE SHIPPING

VERSIONS

 

R60/R61 Mini Cooper JCW Countryman/Paceman Rear Wiper Delete for 2013 + Models

This part eliminates the rear wiper, leaving the car with a cleaner look. The metal center cap is powder coated flat black. Retains stock rear wiper seal. NO LEAKS HERE. Don't settle for copies. Comes with complete instructions.

VPN 630: $24.00

FREE SHIPPING

Cars
 

 

7075-T6 ALUMINUM BODY

303 STAINLESS STEEL MISALIGNMENT SPACERS

R60/R61 Mini Cooper JCW Countryman/Paceman Rear Lower Control Arm for 2013 + Models

 

VCP 7075-T6 aluminum rear lower control arms. We cnc machine the center bars from 1.25 inch 7075-T6 aluminum. We use heavy duty rod ends with self-lubricating carbon fiber-reinforced inserts. The threaded rod ends allow you to dial the suspension camber to your desired spec. We cnc machine the misalignment spacers from stainless steel. VCP only uses the best material available to manufacture all our parts. The kit comes with left and right lower control arms with all hardware and installation instructions. The VCP rear control arms are pre-set to the approximate stock lengths. Finished in Texture black powder coat.

VPN 2002: $249.00

FREE SHIPPING

CARS
 

ADJUSTABILITY

The best method for measuring camber is by using a proper camber gauge. Remember to use the stock camber as a baseline even though stock camber on a lowered Mini will already have some negative camber. It is simply a starting point.